Heat Transform Foil

Floriani Heat Transfer Foil is an easy-to-use one-step process. The adhesive is built right into the foil. Simply cut, weed and press with an iron or heat press for a permanent finish.

Includes one 19” x 24” foil sheet.

Machine washable and dry cleanable.

Floriani Heat Transfer Foil includes a built-in clear, heat-resistant pressing sheet. When cutting, use a half-cut to cut through the foil layer without cutting the pressing/backing sheet. Refer to your digital die cutter instructions for specifics.

After applying the foil to fabric, allow to cool completely before peeling away the clear, heat-resistant pressing sheet.

1. Place foil shiny side (clear heat transfer pressing sheet side) down on die cutting mat. Be sure to remove any air bubbles, starting from the center of the foil and moving out.
2. Cut & weed around the design leaving the clear heat transfer pressing sheet intact.
3. Set heat press or iron to 295/146C. Press the garment for 5 seconds to warm and remove moisture. Place design on fabric, clear heat-resistant pressing sheet side UP. Press for 10-12 seconds with medium pressure. Allow to cool completely. Slowly remove one corner of the pressing sheet to confirm foil had adhered to fabric. If necessary, press again for 10-12 seconds. Slowly remove and discard clear sheet.

Available in these colors: